Tìm kiếm
5 meter 30 cm Cảm Quang Khô Phim Thay Thế Chuyển Nhiệt PCB Board-quốc tế

5 meter 30 cm Cảm Quang Khô Phim Thay Thế Chuyển Nhiệt PCB Board-quốc tế

Tình trạng: Còn hàng
190,000đ
Giao hàng tận nơi trên toàn quốc
Nhận hàng mới thanh toán.
190,000đ
 
194,000đ
 
Van chuyen don gianVận chuyển đơn giản
San pham chat luong Sản phẩm chất lượng cao
Ban hang toan quoc Bán hàng trên toàn quốc
Thanh toan khi nhan hang Thanh toán khi nhận hàng

Sản phẩm được nhập trực tiếp từ nước ngoài. Hoá đơn bán hàng không được hỗ trợ trong trường hợp này.
  • Width: 30cm / 11.81inch
  • Length: 5m / 196.85inch
  • 1.5 mil thickness of dry film can be completely cover a hole of 0.25 inches
  • The dry film can be used in the most ordinary plating solution, no wrinkle, no discoloration
  • It can cut into 50pcs 15cm x 20cm film,and 25pcs 20cm x 30cm film. You can cut it as you like
  • Feature:- Width: 30cm / 11.81inch- Length: 5m / 196.85inch- 1.5 mil thickness of dry film can be completely cover a hole of 0.25 inches- The dry film can be used in the most ordinary plating solution, no wrinkle, no discoloration- It can cut into 50pcs 15cm x 20cm film,and 25pcs 20cm x 30cm film. You can cut it as you like

  • Operating Steps:- Grinding CCL, this simple, using the finest polished clean water frosted paper on the line.- Removing film, photographic film is sandwiched between two layers of film, the first side can make use of transparent tape tear torn, try a few on the line.- And then foil, copper clad laminates can look a little cleaner, pasted, try not to have bubbles.- Good paste membrane used presses, not too hot, about 100 degrees from the fixing.- The printed circuit board film, suggestion is to use film, the fine could reach the highest degree of accuracy if you did not ask for the paper to print it with sulfuric acid trip.- The printed circuit on the photographic plate (Note: Dry film is negative, so to highlight the print, which we usually use photographic plate opposite) with ordinary energy-saving lamps 10 or so, if there is exposure Machine 1 minutes on the line, the sun not tried, it should be 30 seconds -60 seconds, the exposure process Obviously, since the photosensitive film will change color when exposed to light, the light becomes dark blue. You will easily see your circuit diagram appeared on the board.- Developing and tear the protective film on the front panel, into the developer (developer according 1:100,10 g Total 1L of water) to be used when developing a little harder stick cotton wipe board.- Etching, this goes without saying (ferric chloride etchant environmental protection, hydrochloric acid + peroxide, etc.) is recommended environmental etching shop, fast, clean, no odor.- After a good CCL etching, stripping, from film watered by 1:60 or 70, the board bubble like a few minutes,- After the completion of the board, very pretty good, most dense line spacing is 0.1MM, width 0.1MM, 0.1MM lines do know though is very easy to do, but do 0.1 lines and 0.1 line spacing dry film can easily do it.

  • Package Weight: 155.0 G / 5.47 Ounces

  • Package Dimensions (L*W*H): 310*200*30 MM / 12.20*7.87*1.18 Inches

  • Retail Packaging: No, No Packing

Đặc tính sản phẩm

  • Thương hiệu
    OEM
  • SKU
    OE680HLAAANF01VNAMZ-21400678
  • Model
    EPC_AFD_H09
  • Loại bảo hành
    No Warranty
Bộ sản phẩm bao gồm
  • 1 x Photosensitive Dry Film


Đơn vị phân phối chính thức

../images/giaohangnhanh.jpg
Mua hàng trực tuyến (mua hàng online)
mang lại sự tiện lợi, lựa chọn đa dạng hơn và các dịch vụ tốt hơn cho người tiêu dùng, thế nhưng người tiêu dùng Việt Nam vẫn chưa tận hưởng được những tiện ích đó. Chính vì vậy Chúng tôi hợp tác với Giao Hàng Nhanh được triển khai với mong muốn trở thành trung tâm mua sắm trực tuyến số 1 tại Việt Nam nơi bạn có thể chọn lựa mọi thứ… Chúng tôi có tất cả!


Phân phối bởi Giao hàng Nhanh - Bán hàng trên toàn quốc - Thanh toán khi nhận hàng - Đổi trả hàng miễn Phí

Đánh giá
Đánh giá trung bình
0
0 nhận xét
5 star
19 Rất hài lòng
4 star
14 Hài lòng
3 star
5 Bình thường
2 star
0 Dưới trung bình
1 star
0 Thất vọng
Khởi Động Từ LS MC 22A Contactor

Khởi Động Từ LS MC 22A Contactor

Mã SP: 151218

102,800đ
Khởi Động Từ LS MC 40A Contactor

Khởi Động Từ LS MC 40A Contactor

Mã SP: 151217

154,500đ

Tag:

Tag:


Back to top 0.018404006958008