Combo board điều khiển mô tơ, hộp đựng chống nước và 2 remote control
- This product must be installed by well-trained skilled personnel in compliance with the safety regulations the field of residential and commercial swing gate opener devices. Unqualified personnel may damage the instruments And cause harm to the public.
- Electric Power must be disconnected prior to installation, or performing any maintenance.
- Please read the manual carefully before installation. Incorrect installation or misuse of product may cause seriously damage to users and property.
- If the electric cable is damaged or broken, it must be replaced by a whole and properly insulated wires, to avoid electric shock or any hazardous environments.
- Keep the wireless transmitters out of children reach.
- Do not allow children or other individuals to stand by the path of the motor arms or the path of the gates while in operation.
- Do not use the remote wireless transmitters when the gates are out of sight.
- Do not install the products in corrosive, inflammable, and/or explosive environments.
- Avoid installing the motor arm where the override manual release key is exposed to the public .
- Swing Gate Opener Features & Options:In case of power failure: Use the manually spanner to release to separate the motor and gate, open or close the gate manually.
- When Gate is Obstructed: Gate stops .
- Optional: The Gate Opener Controller can be connected to a solar system, a flash light warning, a photocell, back up battery, keypad and other access control devices.
- Speed Control: Gate opening and closing speed can be adjusted.
- Gentle Start: The Gate Opener is equipped with a soft start function.
- Auto Close: The Gate Opener System is equipped with Auto close function with adjustable closing time delay.
- Single or Dual Gate: Either Single or Dual Swing Gate can be opened.
- Multiple Remote Transmitters: The Controller can easily accommodate several unique extra remotes to control the swing gate opener
- Battery Back Up: DC 24V back up battery can be incorporated
- Optional Devices: DC 24V Gate Lock, photocell ,keypad , photocell, push button, large size or small size control box.
- The Gate Opener can be configured to allow smooth noiseless operation.
- The Gate Opener can be configured to enable open condition as default, or close condition as default depending on the placement of the provided hardware bracket brackets.
- Technical Specifications
- Preparing The Installation Site:
- Wireless Transmitter 4. Control Box
- Rubber Stopper 5. Photocell Electric Sensor
- Swing Gate Opener Motor 6. Flash Light Alarm ( Optional )
- Rear Bracket Installation Alternatives to Gate Posts
- Construction Drill and Bolts, Figure 5 right:
- Drill 4 Holes of 8mm Diameter
- Insert the 4 Provided Concrete Bolts and Tighten Properly (Do not over tighten as you may strip the bolt out of the concrete or the brick)
- Place the Motor Connecting Bracket and Tighten with the Provided Screws
- Construction Drill and Weld, Figure 5 middle:
- Drill 4 Holes of 8mm Diameter
- Weld the Motor Bracket to the Post Bracket
- Precast U Bolts, Figure 5 left:
- Locate the 4 Slotted Holes of the Post Bracket above the End of U Bolts
- Apply the Appropriate Screws
- Place the Motor Connecting Bracket and Tighten with the Provided Screws
- Post Rear Fixed Bracket 3 Rain Drainage Aperture
- Lock in 4 Power Cable
- Installation of Extended or Retracted End Motor Arms to Gates:
- Drill 2 Holes of 10.2mm Diameter With Space 68mm Between 2 Holes
- Locate the 2 Slotted Holes Gate Bracket above the Drilled Holes
- Place the End Motor Bracket to the Gate Bracket using the Appropriate Bolts and Tighten Properly(Please note these bolts used to fixed front bracket to the gate are not provided due to the thickness of each gate is different)
- Insert the Lock Pin and Clamping Washers
- Brackets Height :
- Technical Parameters:Control Panel Voltage: AC24V, available for 24 V back up battery.
- Applicable Range: Suitable for double arms swing gate opener.
- Encoder For transmitter: Our own customized rolling code.
- Support remote control: Can memorize 120PCS transmitters at most
- Motor character: 24V DC motor x2
- 2 SIDE terminal is used for connecting any external device that operates double gate
- COM terminal is COMMON used for connecting the “ground” of external devices
- 1 SIDE terminal is used for connecting any external device that operates single gate
- Swipe Card terminal is used for connecting any external devices that will operate to open the gate
- COM terminal is COMMON used for connecting the “ground” of external devices
- Infrared terminal is used for connecting photo electric sensor
- 12V DC output is used for connecting photo electric sensor (Continuous output current
- 24V battery output is used for connecting the back up battery +
- 24V battery output is used for connecting the back up battery -
- 24V DC output is used for connecting external device. (such as photo electric sensor, max current output 1A)
- GND is used for connecting the “ground” of external devices
- 24V DC lamp output is used for connecting flash light +.
- 24V DC lamp output is used for connecting flash light -.
- 24V DC lock output—the NF terminal which used for connecting the electric lock
- COM is COMMON used for connecting the “ground” of lock
- 24V DC lock output—the NA terminal which used for connecting the magnetic lock
- 24V DC alarm output
- 24V DC alarm output
- and 20. Motor1 terminal is used for connecting the motor 1 installed on the gate that opens later and close first. This terminal connect 1st red wire (counted from your left hand side to right hand side)
- AC24V input is used for connecting the transformer
- AC24V input is used for connecting the transformer
- digital display is used for showing you the setting data
- INC+ is used for figure increase when setting the data
- FUN is used for store the data
- DEC- is used for figure decrease when setting the data
- Learning button is used for program/remove remote
- To set the soft start time:
- To set the level of stall force:
- To set the high speed running time:
- To set the auto close time after swipe card:
- To set the interval time:
- To set auto close time:
- To set lamp/alarm output control:
- To set lock time:
- To choose single/double gate open:
- To choose photocell work in NC or NO
- To reset:
Đơn vị phân phối chính thức
Mua hàng trực tuyến (mua hàng online) mang lại sự tiện lợi, lựa chọn đa dạng hơn và các dịch vụ tốt hơn cho người tiêu dùng, thế nhưng người tiêu dùng Việt Nam vẫn chưa tận hưởng được những tiện ích đó. Chính vì vậy Chúng tôi hợp tác với Giao Hàng Nhanh được triển khai với mong muốn trở thành trung tâm mua sắm trực tuyến số 1 tại Việt Nam nơi bạn có thể chọn lựa mọi thứ… Chúng tôi có tất cả!
Phân phối bởi Giao hàng Nhanh - Bán hàng trên toàn quốc - Thanh toán khi nhận hàng - Đổi trả hàng miễn Phí
Gậy Cân Bằng Thanh Kéo Junyi Nv200 Đầu T60 Sunny R30 Tiida R50 Qichen D50 Livina Sylphy
Mã SP: 151661
Mã SP: 151659
Gậy Cân Bằng Thích Hợp Dùng Cho Xe Ô Tô Mazda 323 Familia Thế Hệ Thứ Hai/Ba Pulimahaifuxing
Mã SP: 151658
Magic Speed S2 S3 S6 H2 H3 H3F Weiwang M20 M30 306 Gậy Cân Bằng Tay Kéo Nhỏ Phía Sau Dọc
Mã SP: 151657
Mã SP: 151656
Mã SP: 151655
Mã SP: 151654
1 Cặp Hình Tam Giác Eke Đỡ Kệ Thép Cứng Giá Đỡ Gia Cố Chịu Lực Cao Giá Đỡ Gắn Tường Bền
Mã SP: 151653
Búa 1.5P/2P Tay Cầm Bằng Gỗ Đầu Tròn Cacbon Cao Tay Cầm Tiện Dụng Dụng Cụ Lắp Đặt Tại Nhà
Mã SP: 151652
Mã SP: 151384
Thích Hợp Dùng Cho Thanh Cân Bằng BYD, Thanh Cân Bằng, Ống Cao Su Hở, ỐNg Lót
Mã SP: 150982
Mã SP: 150981
AB038 Wireless RF Remote Control 433MHz Electric Gate Garage Door Remote Control Key Controller
Mã SP: 150980
Mã SP: 150354
Mã SP: 150353
Mã SP: 150352
Mã SP: 150351
Livino Đầu Thu 25 MHz Đến 1760 MHz Cho Tần Số Thu FM SDR RTL2832U R828D A300U
Mã SP: 150350
Tag:
Tag:
- Cưa Cầm Tay (1507)
- Keo & Hàn (1026)
- Máy tời (1425)
- Máy Mài Dũa (1440)
- Khóa Lục Giác (928)
- Phụ kiện dụng cụ cầm tay (1783)
- Hộp dầu (218)
- Kéo và nhíp (1069)
- Súng Bắn Keo - Phụ Kiện (1158)
- Dụng cụ lau chùi (1431)
- Dụng Cụ Vặn Ốc Vít (6668)
- Các Loại Kềm (1898)
- Dụng Cụ Đa Năng (1308)
- Búa - Rìu (1293)
- Dụng cụ kiểm định (1679)
- Xe Kéo - Xe Đẩy Hàng (1539)
- Thiết bị công nghiệp (2086)
- Dụng Cụ Hàn Điện (1848)
- Máy Khoan Cắt Đa Năng (1783)
- Máy Cầm Tay Đa Năng (2373)
- Máy đánh bóng (2023)
- Máy cưa (2033)
- Máy Cắt - Máy Mài (2332)
- Máy Hút Bụi (1585)
- Máy bắn đinh ghim (1364)
- Máy bào (1315)
- Dụng cụ điện cầm tay (1573)
- Máy Khoan Bê Tông (1665)
- Máy Khoan Cầm Tay (2695)
- Máy ép (1844)
- Công tắc điều khiển (1382)
- Phụ Kiện Dụng Cụ Điện Cầm Tay (954)