SN-28B Ổ Cắm Đầu Dụng Cụ Đóng Đnh Crimper Cho JST-SM & Dupont-quốc tế

• Kẹp nhỏ, tạo cảm giác tốt.
• Khóa tự động khóa hơn, mạnh mẽ hơn.
• Ratchet-loại lực lượng thanh kết nối cấu trúc.
• Có thể được điều chỉnh bằng cách điều chỉnh bánh xe điều khiển tay cầm uốn lực lượng.

• Small clamp, feel good.

• Automatic buckle lock, more powerful.

• Ratchet - type force - connecting rod structure.

• Can be adjusted by adjusting the wheel control handle crimping force.

• Operation more easily, pressure line faster.

• This crimping tool can be used to crimp both male and female crimp pins onto 18-28 AWG wires to make custom cables.

Place the wire in the crimp pin, lining it up so that the stripped portion lies between the inner set of tabs on the crimp pin, while insulated wire lies between the outer set of tabs.

Place the wire and crimp pin on the appropriate tooth of the tool's die, making sure that the insulated end is on the raised and wider half of the tooth.

The tabs should point toward the cavity on the other side of the die so that the tool bends them inward around the wire when it closes.

The tabs on a properly crimped pin should form one barrel around the wire conductors and another barrel for strain relief around the wire insulation.

Đặc tính sản phẩm