Túi Khoan Lỗ Jig + tặng Bước Bit Gỗ Joinery Dụng Cụ Cho Kreg Hệ Thống-quốc tế

SpecificationsMaterial: Aluminum 6061Surface treatment: anodizedColor: BlueBlack drill bushing: Diameter 9.5MM (steel jacket heat treatment)Product Size:1. Slant-hole device: 90mm x 47mm x 36mm(Length * Width * Height)2. 9.5mm stepped drill: 58mm (Length)3. Stop ring: 13mm (Height)4. Phillips screwdriver: 150mm (Length)5. Allen wrench: 60mm (Length)6. Tool Box: 200mm x 120mm x 80mm (Length * Width * Height)Scale: Laser engraving (non-screen printing, prolonged use of the mark will not wear)Suitable For:Wood DrillingFeatures -For use with pocket hole joinery-Good abrasion resistance, long service life-Chip fast, giving a wrench-Sharp knife head, smooth without burrHow to use1. Adjust the height of good drill,2. clamped fight wood,3. Drill holes into touch wood,4. The drill bit then put up five millimeters (remember not to start against the wood drill),5. start the drill reaches a certain speed 500-15006. advanced to slow down, and other fine tip drill into the half or full-forward, then feed can acceleratePacking Included1 x Slant-hole device1 x 9.5mm stepped drill (with stop ring)1 x Phillips screwdriver1 x Allen wrench1 x Tool Box